Acrylic Paint

Can You Add Glitter to Acrylic Paint? Best Ways to Apply It

Glitter can be added to acrylic paint, mixed into compatible mediums, or applied over wet paint, depending on the surface and the effect you want.

Published · Updated

There are two practical ways to add glitter to an acrylic painting: mix compatible glitter into the paint or apply glitter over a painted design with a suitable adhesive. Mixing gives a more even shimmer; adding loose glitter over a design makes individual areas stand out. The methods can also be combined.

Glitter adds reflective particles and texture to acrylic paint, but the amount, particle size and finish affect the result. Fine glitter tends to mix more evenly; coarse glitter can add more texture but may be difficult to brush through the paint. Choose glitter intended for art or craft use and test it with the paint or medium you plan to use.

Can you add glitter to acrylic paint?

Glitter can be mixed with acrylic paint or applied over a still-tacky painted surface, with the best method depending on sparkle, texture, and coverage.

When mixing glitter with acrylic paint, ensure that the glitter particles are fine and compatible with the paint. Chunky glitters may not mix well and could affect the consistency of the paint. It is recommended to use fine glitter or glitter specifically made for mixing with paint.

One advantage of mixing glitter with acrylic paint is the ability to create textures. The particles can give decorative pieces a slightly three-dimensional appearance. However, they may also alter drying time and make the painted surface rougher, so a small test is useful before committing to the entire project.

How to mix glitter with acrylic paint: step by step

For an even glitter mix, add a small amount gradually, stir thoroughly, test the result, and adjust with compatible medium rather than overloading the paint. If you want the base color to remain visible, use a relatively light amount of glitter and evaluate it after drying.

Materials you need

Step 1: Prepare your workspace

Cover your workspace with a protective covering like newspaper or plastic. This will help to avoid any accidental spills or stains.

Step 2: Squeeze out acrylic paint

Squeeze out the desired amount of acrylic paint onto your mixing palette or a disposable plate. You can choose any color you like, depending on your artistic vision.

Step 3: Add glitter to the paint

Sprinkle a small amount of fine glitter onto the paint. Start with a conservative amount and gradually add more if desired. You can always add more glitter later if needed.

Step 4: Mix the paint and glitter

Use a palette knife or plastic spoon to thoroughly mix the glitter into the acrylic paint. Make sure the glitter is evenly distributed throughout the paint. Continue mixing until you achieve the desired consistency.

Step 5: Test the mixture

Before applying the glitter paint to your artwork, it's good to test the mixture on a small section or scrap paper. This will allow you to see how the glitter appears in the paint and adjust the amount of glitter if necessary.

Step 6: Apply the glitter paint

Once satisfied with the glitter mixture, use a paintbrush to apply it to your painting surface. You can use various techniques like brush strokes or stippling onto the surface for different effects.

Step 7: Let it dry and evaluate

Allow the paint to dry completely according to the instructions. Once dry, evaluate the glitter effect on your work. If you feel it needs more sparkle, you can repeat the process by applying additional layers of glitter paint.

Step 8: Seal the artwork

To protect the glitter and add a glossy finish, you can apply a sealant over the dried paint. Follow the instructions on the varnish or sealant product for the best results.

Additional mixing tips

What happens when you mix glitter with acrylic paint?

Adding glitter changes acrylic paint by introducing reflective particles, increasing texture, and sometimes affecting flow, opacity, coverage, and the feel of the dried film.

Distribution: When stirred into the paint, the particles become suspended in the acrylic mixture. They can also settle between uses, which is another reason to prepare small amounts and remix only as needed.

Appearance: Glitter reflects light, and the color, size and amount of glitter determine whether the result is a subtle shimmer or a more obvious textured finish. A dark or opaque paint can hide some glitter below the surface; glitter applied on top may remain more visible. For other reflective effects, see how to make reflective paint.

Texture: Glitter particles can make dried acrylic paint feel slightly rough or gritty. The texture varies with particle size and the quantity added.

Drying and sealing: Allow each layer to dry thoroughly. If you plan to varnish or seal the artwork, test a small sample first because some clear coats may dull the sparkle or change the surface appearance.

Glitter does not need to chemically react with acrylic paint to be held in the coating. The choice of paint or clear acrylic binder, and how much material is added, matters more than trying to dissolve glitter into the paint.

How to apply loose glitter over an acrylic-painted design

The original painted-design method is useful when you want clear outlines, different glitter colors in separate areas, or a brighter sparkle than you can get by stirring glitter into opaque paint. You paint the underlying picture first, then apply glitter where you want it.

Step 1: Draw an outline

Cartoon-style images, silhouettes and simple lettering work well because the areas are easy to separate. Sketch the design directly onto a suitable canvas, painting board or thick paper. If using a printed picture, adjust the size before transferring it to the surface.

If you transfer a traced design face-down, flip the source image horizontally first (often labeled “Flip horizontal” in an image editor) so lettering reads correctly on the canvas. If you trace directly in the final orientation, leave the image as it is.

Step 2: Transfer the picture

Tape the printed picture to a stable surface and use tracing or transfer paper if you do not want to draw freehand. Trace the outlines carefully and transfer them to the painting surface according to the paper's instructions. Low-tack painter's tape helps keep the pattern in place without making it difficult to remove.

Choose a surface that will support the paint, glue and glitter. A rigid painting board is convenient for projects that will be lifted to shake off excess glitter; if you choose paper, use a weight that will not buckle easily.

Step 3: Paint the design

Work one color at a time and wash the paintbrush between colors. For tiny areas, use smaller pointed brushes; for larger sections, use wider flat brushes. Let the paint dry before masking or gluing adjacent regions if you need crisp color boundaries.

Paint the edges if the sides of the board or sign will be visible. Glitter can hide minor brush marks, but it will not reliably cover an uneven, peeling or poorly adhered base coat.

Step 4: Brush adhesive onto the chosen areas

Use a craft adhesive, decoupage product or acrylic gel medium suitable for the painted surface. Brush it only where you want glitter. A smaller brush gives more control around outlines, while a larger brush covers broad shapes. Work in sections so the adhesive remains wet while you apply the glitter.

Do not assume all school glues, silicone adhesives and acrylic mediums are interchangeable. Check that the product dries as intended and adheres to both the underlying paint and the glitter.

Step 5: Sprinkle glitter and remove the excess

Sprinkle the chosen glitter over the wet adhesive, covering the intended area without burying nearby details. Let it settle, then gently tilt the board over clean paper or a tray to collect the excess. A dry, soft brush can help remove stray particles around the edges once the adhesive has set enough not to smear.

Repeat with the next color or area. Let the adhesive dry fully before handling, brushing away remaining loose glitter or adding another finish.

Tips for glitter acrylic painting

How to keep glitter from flaking off

For a more durable glitter finish, use compatible paint or medium, allow each layer to dry fully, and protect the surface with an appropriate clear sealer if the project will be handled. A clear finish is not automatically needed for every display piece, and it may reduce sparkle.

GOLDEN's guide to acrylic gels and mediums explains their use as binders and collage adhesives, while distinguishing those materials from removable final picture varnishes. Check the individual product instructions rather than assuming any clear glue or acrylic medium can serve as a permanent varnish.

Example: Glitter on a painted wooden sign

For a decorative cutout sign or word, gather a suitable primer and paint, sandpaper for preparing the bare wood, a paintbrush, matching glitter, decoupage adhesive and an optional compatible clear finish.

  1. Prepare the wooden cutout and smooth rough edges. Prime it if the chosen paint and surface require it, then let the primer dry as directed.
  2. Paint the sign, including the visible sides. Let the paint dry before adding any adhesive or glitter; avoid sanding through the finished painted surface.
  3. Brush adhesive onto one letter or part of the design at a time. Add glitter while that section is wet, then repeat with the remaining letters.
  4. Gently tap off excess glitter over a tray or sheet of paper and let the adhesive dry fully.
  5. If the sign will be handled frequently, test and apply a compatible protective coat according to its label. Avoid assuming that an arbitrary number of polyurethane coats is suitable for every painted craft surface.

Can you mix glitter with acrylic paint on wood?

Glitter can be combined with acrylic paint on wood when the surface is clean and prepared, with a clear finish added if the project needs extra protection.

Gather materials: Acrylic paint, paint-safe glitter, a suitable adhesive or acrylic medium, a brush or foam applicator, and a clean mixing palette are useful starting points. For glitter placed on top rather than mixed in, you may use a compatible decoupage product.

Make a glitter station: Protect nearby furniture and flooring. Place a large piece of paper or a tray under small pieces of wood to catch and reuse excess loose glitter.

Prepare the wood: Smooth rough or splintered areas, clean away sanding dust and prime when required by the paint. A sound, evenly prepared surface helps both the paint and adhesive grip.

Create the design: Mask areas that should remain free of glitter with low-tack tape, or outline the pattern before painting. Remove the tape carefully at the stage recommended for the product you use, rather than tearing at a fully hardened coating.

Can you add Mod Podge and glitter to wet acrylic paint?

Mod Podge and glitter can be used with acrylic paint, but each layer should be compatible and allowed to dry properly to avoid cloudy or weak finishes. For most layered craft projects, it is simpler to finish and dry the acrylic paint before applying decoupage adhesive and loose glitter.

Low-tack painter's tape can create stripes or chevrons. Apply the glitter to one section at a time and allow the adhesive to dry before adding further layers. If you coat the glitter with more Mod Podge, test the appearance first: the additional layer may change its sheen or make fine sparkle less visible.

You can also add painted accents, drawings or lettering after the appropriate layers have cured, as long as the products are compatible.

Does glitter acrylic paint stay permanent on fabric?

Glitter acrylic can decorate fabric, but flexibility and wash resistance depend on the paint, fabric medium, curing, and intended use after application. Ordinary acrylic can stiffen cloth, and loose glitter may shed as fabric flexes or is washed. Prefer products labeled for fabric and follow their heat-setting and care directions when applicable.

Can you use acrylic paint and glitter in a clear ornament?

Clear ornaments can be decorated with acrylic paint and glitter by working in thin layers and allowing each coating to dry before adding the next material. For transparent ornaments, test whether the paint and adhesive dry clear or obscure the effect you want. Make sure the ornament can dry fully if you apply anything inside it.

Can you use acrylic paint on tumblers before glitter?

Acrylic paint and glitter can be layered on tumblers, but durability depends on surface preparation, full drying, and a compatible protective finish. Keep ordinary craft paints, glitter and sealers away from rims and surfaces that contact food or drinks unless the specific product is approved for that use.

Is it safe to use glitter with acrylic paint?

Choose materials rated for the project, work over a protected surface and keep loose glitter away from eyes. Decorative acrylic paint and craft glitter are not automatically safe for skin or cosmetic use; a glitter labeled cosmetic-grade does not make ordinary acrylic paint suitable for face painting.

If using spray primers, adhesives or sealers, follow the manufacturer's ventilation and protective-equipment guidance. Keep small loose particles away from young children and collect excess glitter before cleaning the workspace.

Final thoughts

Mixing glitter into acrylic paint is useful for an overall shimmer; applying loose glitter with adhesive is better for crisp shapes and stronger localized sparkle. Test the paint, glitter and any clear finish together, then choose the method that suits the surface and how the finished piece will be used.

More guides on glitter finishes and acrylic craft techniques.

Best Glitter Paint for Walls

Compare premixed glitter coatings and additives when choosing a decorative finish for larger painted surfaces.