Paint Type

Anti-Slip Paint

Anti-slip paint is a textured floor coating that improves traction on walking surfaces, unlike separate grit additives mixed into ordinary floor coatings.

Anti-slip paint surface compatibility

Anti-slip paint coats prepared wood or concrete walking surfaces; traffic, moisture, and limits depend on product approval for each intended use.

Surface Compatibility Preparation Primer or ground Finish Guide
Wood Excellent on properly prepared porches, decks, steps, and other approved walking surfaces Clean thoroughly, remove dirt, oil, grease, loose coating, and mildew, then sand weathered fibers or glossy paint as needed. Use the interior or exterior wood primer specified by the selected anti-slip floor-paint system. Textured low-lustre finish intended to improve traction; allow the stated cure before regular traffic. —
Concrete Excellent on properly prepared porches, patios, walkways, pool decks, and ramps Make sure the concrete is cured, clean, sound, dry, and free of dirt, oil, grease, loose coating, or moisture problems; profile exposed concrete when required. Use a compatible concrete or masonry bonding primer as specified by the anti-slip coating system. Textured slip-resistant finish; do not assume suitability for garage floors or automotive traffic unless the exact product allows it. —

Sources: BEHR Premium Porch & Patio Anti-Slip Floor Paint, BEHR anti-slip floor-finish additive, Blackfriar Anti-Slip Floor Paint, and Rust-Oleum Stops Rust AntiSlip Coating.

Painters who used anti-slip paint

Forrester’s anti-slip floor painting turns a functional coating into public art, letting visitors safely cross the work as a shared, participatory space.

Sources: Artmongers: The Water Drop Stage; Espronceda: Patricio Forrester.

Anti-slip paint articles

PaintZeal has no dedicated anti-slip paint articles yet, so this guide compares traction coatings, approved floor surfaces, preparation, and use limits.