Paint Type

Magnetic Paint

Magnetic paint is an iron-rich coating that creates a magnet-receptive surface and is usually applied beneath a compatible decorative topcoat.

Magnetic paint surface compatibility

Magnetic paint creates an interior base for magnets; strength depends on filler content, film thickness, substrate preparation, and the topcoat applied.

Surface Compatibility Preparation Primer or ground Finish Guide
Drywall Excellent for interior magnetic walls when the coating system approves drywall Repair defects, sand smooth, remove dust, and create an even surface because bumps reduce close magnet contact. Use the primer specified for new, patched, porous, or previously painted drywall. Usually dark gray before topcoating; multiple magnetic coats improve attraction, while excessive topcoat thickness can reduce it. —
Wood Good to excellent on smooth interior wood, MDF, doors, panels, and furniture when approved by the product Clean, sand smooth, remove dust, and repair open grain or defects that would interrupt the magnetic film. Prime bare or absorbent wood when the selected system requires it. Magnet-receptive base that can commonly be covered with compatible wall, chalkboard, or other decorative paint. —
Concrete Good on sound interior concrete or cementitious surfaces when the magnetic coating explicitly approves mineral substrates Allow new concrete to cure, correct moisture problems, remove dust and contamination, and smooth rough areas where practical. Porous mineral surfaces commonly need a compatible primer or sealer before the magnetic coating. Functional magnetic layer whose final appearance can be changed with a compatible topcoat. —

Sources: MagPaint MagnetPaint, SPS Magnetic Paint, and LKAB Minerals Magnet Paint.

Painters who used magnetic paint

No PaintZeal painter profile documents magnetic paint use yet; this coating is a functional magnet-receptive layer rather than a fine-art medium.

Magnetic paint articles

PaintZeal has no dedicated magnetic paint articles yet, so this guide covers iron-rich coatings, magnet strength, substrate preparation, and topcoats.